Shop
Showing 691–705 of 1808 results
-
Level Control
KRIWAN OLC-D1 Level Control (Bitzer Part-No. 34794901)
KRIWAN OLC-D1 Level Control (Bitzer Part-No. 34794901)
Made in Germany
Specification:
Bitzer Part-No. 34794901
Supply AC 50/60Hz, 230V, ±10%, 3VA
Ambient temperature range: -30°C – +60°C
Relay AC 240V.max.2.5A, C300Features:
Level monitoring
The OLC series consists of a screw-in prism unit and an optical level detection device. The prism is installed in the compressor or the vessel and is not included with the OLC. The level detection device can be replaced without opening to the compressor or the vessel. Detection of the level is via infrared light. There is a built-in monitoring system for correct installation.Oil level monitoring in compressors
The OLC series are used for contactless oil level monitoring in compressors in order to safeguard sufficient lubrication of the internal mechanics.
As the refrigerant can be absorbed by oil, fluctuation of the oil level in the compressor is common in refrigeration systems and thereby oil levels need to be monitored.
OLC-D1 is for screw compressors and opens the relay after 5 seconds delay.Level monitoring in vessels
The OLC-D1 is meant for level monitoring in vessels and does not have the operation recognition input, D1.
The OLC-D1 releases the relay if the level is too low and activates the relay if the level is valid. There is a 5 seconds time delay between switching the relay.SKU: ET-KN-OLC-D1 -
JET CLEANER
KYOWA KYC-20A JET CLEANPAK
KYOWA KYC-20A JET CLEANPAK
Made in Japan
New and Striking Pumps for Cleaning Applications from KYOWA!
“KYOWA” JET CLEANER KYC-20A with Unique Pumping Mechanism (Pat.Pendeing)
They are Compact, Super Lightweight, and Unbeatable in Pumping Performance.– Oil-less construction (no lubrication oil grease required) need no maintenance.
– High-pressure output comes from efficiency-oriented “no nonsense” design.
– Differential operation (one suction and two dischargers per cycle) keeps the discharge fluctuations very low.
– Close-coupled construction eliminates problems normally associated with the motor drive, such as belt slipping.
– Design that fully utilizes rolling frictions (utility model and design registration being applied for) keeps the starting torque to minimum and provides maximum output.
– Simple and rugged construction permits easy disassembly, cleaning, and re-assembly.
– Compact and super-lightweight structure makes it handy and portable.
– Newly developed universal nozzle permits almost every washing job with ease.SPECIFICATIONS
Type: CLEANPAK. KYC-20A
Dimensions in mm, L×H×W: 250×210×230
Weight in kg: 9Pump
Pressure in kg/cm2: 40(PSI 560)
Discharge in l/min: 2.9/3.5
Revolutions per minute: 1430/1740Electric Motor
Type: Single-phase, 50/60Hz
Output in W: 250APPLICATIONS
1. Air conditioner Cleaning.
2. Car engine compartment Cleaning.
3. Washing and finishing in plasterers’ work.
4. Food processing equipment Cleaning.
5. Farm tool and machine Cleaning.
6. Insecting machine Cleaning.
7. Steel Pipe Cleaning.SKU: CA-KA-KYC-20A -
JET CLEANER
KYOWA KYC-40A JET CLEANPAK
KYOWA KYC-40A JET CLEANPAK
Made in Japan
New and Striking Pumps for Cleaning Applications from KYOWA!
“KYOWA” JET CLEANER KYC-40A with Unique Pumping Mechanism (Pat.Pendeing)
They are Compact, Super Lightweight, and Unbeatable in Pumping Performance.– Oil-less construction (no lubrication oil grease required) need no maintenance.
– High-pressure output comes from efficiency-oriented “no nonsense” design.
– Differential operation (one suction and two dischargers per cycle) keeps the discharge fluctuations very low.
– Close-coupled construction eliminates problems normally associated with the motor drive, such as belt slipping.
– Design that fully utilizes rolling frictions (utility model and design registration being applied for) keeps the starting torque to minimum and provides maximum output.
– Simple and rugged construction permits easy disassembly, cleaning, and re-assembly.
– Compact and super-lightweight structure makes it handy and portable.
– Newly developed universal nozzle permits almost every washing job with ease.SPECIFICATIONS
Model: KYC-40A
Pressure (MPa) : 3.5
Discharge (l/min) : 7
Motor (KW): 0.4
Water feed system: Self-priming
Dimension L×W×H (mm) : 325×255×240
Weight (kg): 17APPLICATIONS
1. Air conditioner Cleaning.
2. Car engine compartment Cleaning.
3. Washing and finishing in plasterers’ work.
4. Food processing equipment Cleaning.
5. Farm tool and machine Cleaning.
6. Insecting machine Cleaning.
7. Steel Pipe Cleaning.SKU: CA-KA-KYC-40A -
Condensate Removal Pump
Little Giant 554138 VCC-20S Condensate Removal Pump
Little Giant 554138 VCC-20S Condensate Removal Pump
Made in Mexico
Designed for automatic collection and removal of condensate from air conditioning, refrigeration, and dehumidification equipment installed in air handling and plenum applications having limited space and where gravity drainage is not possible or practical.
The VCC-20 series is constructed with plastics that have been tested by Underwriter’s Laboratories’ to UL Standard 2043 “Fire Test for Heat and Visible Smoke Release for Discrete Products and Their Accessories Installed in Air Handling Spaces”.– The pump meets the requirements of UL 2043 and is labeled “For Plenum Applications”.
– 1/30 hp motor
– 1-3/4″ low profile tank height ideal for tight spaces
– Vertical centrifugal pump design
– 1.2 quart (1.1 liters) capacity tank
– Automatic start and stop switch
– 3/8″ O.D. barbed discharge adapter with built-in check valve (installed on the pump)
– 1-1/8″ diameter inlet
– Float-activated auxiliary high-level switch
– Two 72″ high-level switch lead wires
– Thermally protected, fan-cooled motor
– Intermittent liquid temperature up to 140 °F
– 20 ft shut-off head (115V model)
– Designed for hard-wire installation only
– 72″ 3-conductor lead wires with conduit fitting for ½” diameter flexible metal conduit
– Stainless motor shaftSKU: WP-LG-554138-1 -
Manifolds
M2-3-DELUXE-DS-CO2 Two-way Manifold with oilfilled bellow type gauges
This serie of manifolds is equipped with sight glass and bellow type gauges
class 1. The oilfilled gauges are made of anodized aluminium.With oilfilled bellow type gauges, hook, 3 charging lines 1⁄4” SAE blue, red and yellow, length 36 inches (90 cm),
in a sturdy plastic caseSKU: MF-RF-M2-3-DELUXE-DS-CO2
-
Level Control
KRIWAN OLC-D1 Level Control (Bitzer Part-No. 34794901)
KRIWAN OLC-D1 Level Control (Bitzer Part-No. 34794901)
Made in Germany
Specification:
Bitzer Part-No. 34794901
Supply AC 50/60Hz, 230V, ±10%, 3VA
Ambient temperature range: -30°C – +60°C
Relay AC 240V.max.2.5A, C300Features:
Level monitoring
The OLC series consists of a screw-in prism unit and an optical level detection device. The prism is installed in the compressor or the vessel and is not included with the OLC. The level detection device can be replaced without opening to the compressor or the vessel. Detection of the level is via infrared light. There is a built-in monitoring system for correct installation.Oil level monitoring in compressors
The OLC series are used for contactless oil level monitoring in compressors in order to safeguard sufficient lubrication of the internal mechanics.
As the refrigerant can be absorbed by oil, fluctuation of the oil level in the compressor is common in refrigeration systems and thereby oil levels need to be monitored.
OLC-D1 is for screw compressors and opens the relay after 5 seconds delay.Level monitoring in vessels
The OLC-D1 is meant for level monitoring in vessels and does not have the operation recognition input, D1.
The OLC-D1 releases the relay if the level is too low and activates the relay if the level is valid. There is a 5 seconds time delay between switching the relay. -
JET CLEANER
KYOWA KYC-20A JET CLEANPAK
KYOWA KYC-20A JET CLEANPAK
Made in Japan
New and Striking Pumps for Cleaning Applications from KYOWA!
“KYOWA” JET CLEANER KYC-20A with Unique Pumping Mechanism (Pat.Pendeing)
They are Compact, Super Lightweight, and Unbeatable in Pumping Performance.– Oil-less construction (no lubrication oil grease required) need no maintenance.
– High-pressure output comes from efficiency-oriented “no nonsense” design.
– Differential operation (one suction and two dischargers per cycle) keeps the discharge fluctuations very low.
– Close-coupled construction eliminates problems normally associated with the motor drive, such as belt slipping.
– Design that fully utilizes rolling frictions (utility model and design registration being applied for) keeps the starting torque to minimum and provides maximum output.
– Simple and rugged construction permits easy disassembly, cleaning, and re-assembly.
– Compact and super-lightweight structure makes it handy and portable.
– Newly developed universal nozzle permits almost every washing job with ease.SPECIFICATIONS
Type: CLEANPAK. KYC-20A
Dimensions in mm, L×H×W: 250×210×230
Weight in kg: 9Pump
Pressure in kg/cm2: 40(PSI 560)
Discharge in l/min: 2.9/3.5
Revolutions per minute: 1430/1740Electric Motor
Type: Single-phase, 50/60Hz
Output in W: 250APPLICATIONS
1. Air conditioner Cleaning.
2. Car engine compartment Cleaning.
3. Washing and finishing in plasterers’ work.
4. Food processing equipment Cleaning.
5. Farm tool and machine Cleaning.
6. Insecting machine Cleaning.
7. Steel Pipe Cleaning. -
JET CLEANER
KYOWA KYC-40A JET CLEANPAK
KYOWA KYC-40A JET CLEANPAK
Made in Japan
New and Striking Pumps for Cleaning Applications from KYOWA!
“KYOWA” JET CLEANER KYC-40A with Unique Pumping Mechanism (Pat.Pendeing)
They are Compact, Super Lightweight, and Unbeatable in Pumping Performance.– Oil-less construction (no lubrication oil grease required) need no maintenance.
– High-pressure output comes from efficiency-oriented “no nonsense” design.
– Differential operation (one suction and two dischargers per cycle) keeps the discharge fluctuations very low.
– Close-coupled construction eliminates problems normally associated with the motor drive, such as belt slipping.
– Design that fully utilizes rolling frictions (utility model and design registration being applied for) keeps the starting torque to minimum and provides maximum output.
– Simple and rugged construction permits easy disassembly, cleaning, and re-assembly.
– Compact and super-lightweight structure makes it handy and portable.
– Newly developed universal nozzle permits almost every washing job with ease.SPECIFICATIONS
Model: KYC-40A
Pressure (MPa) : 3.5
Discharge (l/min) : 7
Motor (KW): 0.4
Water feed system: Self-priming
Dimension L×W×H (mm) : 325×255×240
Weight (kg): 17APPLICATIONS
1. Air conditioner Cleaning.
2. Car engine compartment Cleaning.
3. Washing and finishing in plasterers’ work.
4. Food processing equipment Cleaning.
5. Farm tool and machine Cleaning.
6. Insecting machine Cleaning.
7. Steel Pipe Cleaning. -
Condensate Removal Pump
Little Giant 554138 VCC-20S Condensate Removal Pump
Little Giant 554138 VCC-20S Condensate Removal Pump
Made in Mexico
Designed for automatic collection and removal of condensate from air conditioning, refrigeration, and dehumidification equipment installed in air handling and plenum applications having limited space and where gravity drainage is not possible or practical.
The VCC-20 series is constructed with plastics that have been tested by Underwriter’s Laboratories’ to UL Standard 2043 “Fire Test for Heat and Visible Smoke Release for Discrete Products and Their Accessories Installed in Air Handling Spaces”.– The pump meets the requirements of UL 2043 and is labeled “For Plenum Applications”.
– 1/30 hp motor
– 1-3/4″ low profile tank height ideal for tight spaces
– Vertical centrifugal pump design
– 1.2 quart (1.1 liters) capacity tank
– Automatic start and stop switch
– 3/8″ O.D. barbed discharge adapter with built-in check valve (installed on the pump)
– 1-1/8″ diameter inlet
– Float-activated auxiliary high-level switch
– Two 72″ high-level switch lead wires
– Thermally protected, fan-cooled motor
– Intermittent liquid temperature up to 140 °F
– 20 ft shut-off head (115V model)
– Designed for hard-wire installation only
– 72″ 3-conductor lead wires with conduit fitting for ½” diameter flexible metal conduit
– Stainless motor shaft -
Manifolds
M2-3-DELUXE-DS-CO2 Two-way Manifold with oilfilled bellow type gauges
This serie of manifolds is equipped with sight glass and bellow type gauges
class 1. The oilfilled gauges are made of anodized aluminium.With oilfilled bellow type gauges, hook, 3 charging lines 1⁄4” SAE blue, red and yellow, length 36 inches (90 cm),
in a sturdy plastic case
-
Level Control
KRIWAN OLC-D1 Level Control (Bitzer Part-No. 34794901)
KRIWAN OLC-D1 Level Control (Bitzer Part-No. 34794901)
Made in Germany
Specification:
Bitzer Part-No. 34794901
Supply AC 50/60Hz, 230V, ±10%, 3VA
Ambient temperature range: -30°C – +60°C
Relay AC 240V.max.2.5A, C300Features:
Level monitoring
The OLC series consists of a screw-in prism unit and an optical level detection device. The prism is installed in the compressor or the vessel and is not included with the OLC. The level detection device can be replaced without opening to the compressor or the vessel. Detection of the level is via infrared light. There is a built-in monitoring system for correct installation.Oil level monitoring in compressors
The OLC series are used for contactless oil level monitoring in compressors in order to safeguard sufficient lubrication of the internal mechanics.
As the refrigerant can be absorbed by oil, fluctuation of the oil level in the compressor is common in refrigeration systems and thereby oil levels need to be monitored.
OLC-D1 is for screw compressors and opens the relay after 5 seconds delay.Level monitoring in vessels
The OLC-D1 is meant for level monitoring in vessels and does not have the operation recognition input, D1.
The OLC-D1 releases the relay if the level is too low and activates the relay if the level is valid. There is a 5 seconds time delay between switching the relay. -
JET CLEANER
KYOWA KYC-20A JET CLEANPAK
KYOWA KYC-20A JET CLEANPAK
Made in Japan
New and Striking Pumps for Cleaning Applications from KYOWA!
“KYOWA” JET CLEANER KYC-20A with Unique Pumping Mechanism (Pat.Pendeing)
They are Compact, Super Lightweight, and Unbeatable in Pumping Performance.– Oil-less construction (no lubrication oil grease required) need no maintenance.
– High-pressure output comes from efficiency-oriented “no nonsense” design.
– Differential operation (one suction and two dischargers per cycle) keeps the discharge fluctuations very low.
– Close-coupled construction eliminates problems normally associated with the motor drive, such as belt slipping.
– Design that fully utilizes rolling frictions (utility model and design registration being applied for) keeps the starting torque to minimum and provides maximum output.
– Simple and rugged construction permits easy disassembly, cleaning, and re-assembly.
– Compact and super-lightweight structure makes it handy and portable.
– Newly developed universal nozzle permits almost every washing job with ease.SPECIFICATIONS
Type: CLEANPAK. KYC-20A
Dimensions in mm, L×H×W: 250×210×230
Weight in kg: 9Pump
Pressure in kg/cm2: 40(PSI 560)
Discharge in l/min: 2.9/3.5
Revolutions per minute: 1430/1740Electric Motor
Type: Single-phase, 50/60Hz
Output in W: 250APPLICATIONS
1. Air conditioner Cleaning.
2. Car engine compartment Cleaning.
3. Washing and finishing in plasterers’ work.
4. Food processing equipment Cleaning.
5. Farm tool and machine Cleaning.
6. Insecting machine Cleaning.
7. Steel Pipe Cleaning. -
JET CLEANER
KYOWA KYC-40A JET CLEANPAK
KYOWA KYC-40A JET CLEANPAK
Made in Japan
New and Striking Pumps for Cleaning Applications from KYOWA!
“KYOWA” JET CLEANER KYC-40A with Unique Pumping Mechanism (Pat.Pendeing)
They are Compact, Super Lightweight, and Unbeatable in Pumping Performance.– Oil-less construction (no lubrication oil grease required) need no maintenance.
– High-pressure output comes from efficiency-oriented “no nonsense” design.
– Differential operation (one suction and two dischargers per cycle) keeps the discharge fluctuations very low.
– Close-coupled construction eliminates problems normally associated with the motor drive, such as belt slipping.
– Design that fully utilizes rolling frictions (utility model and design registration being applied for) keeps the starting torque to minimum and provides maximum output.
– Simple and rugged construction permits easy disassembly, cleaning, and re-assembly.
– Compact and super-lightweight structure makes it handy and portable.
– Newly developed universal nozzle permits almost every washing job with ease.SPECIFICATIONS
Model: KYC-40A
Pressure (MPa) : 3.5
Discharge (l/min) : 7
Motor (KW): 0.4
Water feed system: Self-priming
Dimension L×W×H (mm) : 325×255×240
Weight (kg): 17APPLICATIONS
1. Air conditioner Cleaning.
2. Car engine compartment Cleaning.
3. Washing and finishing in plasterers’ work.
4. Food processing equipment Cleaning.
5. Farm tool and machine Cleaning.
6. Insecting machine Cleaning.
7. Steel Pipe Cleaning. -
Condensate Removal Pump
Little Giant 554138 VCC-20S Condensate Removal Pump
Little Giant 554138 VCC-20S Condensate Removal Pump
Made in Mexico
Designed for automatic collection and removal of condensate from air conditioning, refrigeration, and dehumidification equipment installed in air handling and plenum applications having limited space and where gravity drainage is not possible or practical.
The VCC-20 series is constructed with plastics that have been tested by Underwriter’s Laboratories’ to UL Standard 2043 “Fire Test for Heat and Visible Smoke Release for Discrete Products and Their Accessories Installed in Air Handling Spaces”.– The pump meets the requirements of UL 2043 and is labeled “For Plenum Applications”.
– 1/30 hp motor
– 1-3/4″ low profile tank height ideal for tight spaces
– Vertical centrifugal pump design
– 1.2 quart (1.1 liters) capacity tank
– Automatic start and stop switch
– 3/8″ O.D. barbed discharge adapter with built-in check valve (installed on the pump)
– 1-1/8″ diameter inlet
– Float-activated auxiliary high-level switch
– Two 72″ high-level switch lead wires
– Thermally protected, fan-cooled motor
– Intermittent liquid temperature up to 140 °F
– 20 ft shut-off head (115V model)
– Designed for hard-wire installation only
– 72″ 3-conductor lead wires with conduit fitting for ½” diameter flexible metal conduit
– Stainless motor shaft -
Manifolds
M2-3-DELUXE-DS-CO2 Two-way Manifold with oilfilled bellow type gauges
This serie of manifolds is equipped with sight glass and bellow type gauges
class 1. The oilfilled gauges are made of anodized aluminium.With oilfilled bellow type gauges, hook, 3 charging lines 1⁄4” SAE blue, red and yellow, length 36 inches (90 cm),
in a sturdy plastic case
