Shop
Showing 631–645 of 1808 results
-
Infrared Thermometer
Fieldpiece SIG1 Gun Style Infrared Thermometer
Fieldpiece SIG1 Gun Style Infrared Thermometer
The SIG1 thermometer is a low cost, standalone non-contact infrared thermometer. Simply aim the thermometer at the target and pull the “trigger” to display the surface temperature. The temperature measured will be the average of all the temperatures in the field of view. The closer you are to the target, the smaller the area. The further away, the larger the area measured.
Applications
The infrared temperature measurement is fast and easy. It works best for fast readings, relative readings (one to another or the same one at different times), or temperature readings of hard to reach places. The following are some applications:
– “Shoot” an inside wall for quick and fast indoor ambient temperature reading.
– Heating and air conditioning where fast and/or easy measurement is most important.
– Motor bearings: high temperature can indicate bearings that might need replacement.
– Circuit breakers: a circuit breaker that is not operating properly can get hot. By scanning a panel, you will be able to find the hot one.
– Poor power line connections: a bad connection can get hot.Specifications
Temperature range: -22 to 1022°F (-30 to 550°C)
Resolution: 1°F
Response time: 0.25 second
Emissivity: Fixed 0.95
Battery: Standard 9V
Battery life: 9 hrs typical, laser and backlight
Operating temperature: 32 to 122°F (0 to 50°C)
Storage temperature: -4 to 140oF (-20 to 60°C)
Accuracy:
±2%rdg (213 to 1022°F) (100 to 550°C),
±4°F (-22 to 212°F) ±2°C (-30 to 100°C)
Field of view: 10:1
Wave length: Red (630~670nm)
Power out: <1mW, class 2 laser product
Display: 1999 count 3.5 digit LCD
Auto-off: Approx. 10 seconds
Weight: 157g (with battery)
Dimensions: 5.83” x 4.13” x 1.65” (15.81cm x10.5cm x 4.19cm)
Accessories: Protective cover with strap, battery (installed), and operator’s manual.SKU: ET-FP-SIG1 -
Infrared Refrigerant Leak Detector
Fieldpiece SRL2K7 Infrared Refrigerant Leak Detector
Fieldpiece SRL2K7 Infrared Refrigerant Leak Detector
– Sensitivity better than 0.1 oz/yr
– Triggers on all CFCs, HFCs, HCFCs and blends.
– Auto recalibration
– Sealed sensor. Unlike heated diode and corona discharge leak detectors, the sensor doesn’t “touch” refrigerant as it passes through the instrument. Heated diode and corona discharge units tend to degrade or fail when they come in contact with high concentrations of refrigerant or touch liquid.
– Doesn’t trigger on oil or moisture like other types of detectors.
– Senses change in refrigerant levels. Works even in contaminated environments.
– Up and running in less than 30 seconds. Some heated elements and corona discharge units take much longer to warm up. UV dyes can take several hours to travel through a running system and can degrade system components.Designed for HVACR
– Superior Controlled Sensitivity. Doesn’t trigger on nuisance leaks unless in Turbo Mode.
– Rugged / Ergonomic Features. Ruggedized boot and it fit’s in your hand.
– Infrared Sensor. Lasts up to 10 years.
– Three Sensitivity Levels. Meets new SAE standards.
– Audible/Visual Alarm. Turn the beep on or off – you decide.
– Lithium Ion Battery (3.7V DC). Deliver around 8 hours of use per charge. Works while charging.
– Non-conductive, Sturdy Probe. Stays where you want it.
– Peak / Mute Buttons. Find leaks in noisy environments.
– Magnetic Hanger. Hang the unit while you repair the leak.
– Weighs 14oz. Tough doesn’t have to mean heavy.Delivery Scope:
– Advanced Refrigerant Leak Detector – SRL2(K7)
– Include chargers for the truck and the shop
– (5) O-rings and 10 Replacement Filters – RFL2
– 9-inch Flex-Probe Extension – RFE2
– Rigid Extension Probe – RRE2
– Blow-Molded Case – ABMK3
– Operator’s ManualSKU: ET-FP-SRL2K7 -
Vacuum Gauges
Fieldpiece SVG3 Digital Micron Vacuum Gauge
Fieldpiece SVG3 Digital Micron Vacuum Gauge
Fieldpiece SVG3 Digital Micron Vacuum Gauge is a compact, rugged gauge that is loaded with features HVACR professionals need to help them do more. It includes a large, dual display with a rate indicator, alarms, timer, rugged rubberized case, and a hook at strap that allows the vacuum gauge to be hung at any angle.
Fieldpiece SVG3 contains features to make evacuations easier and faster. The display has a bright backlight for high visibility in any situation. To minimize leaks the SVG3 has a schrader depressor that can connect directly to your core removal tool, or directly to the service port. Fewer connections reduce the potential for leaks unrelated to the system. The rate indicator helps determine if there are any leaks within the system.
When the vacuum reaches the low alarm set point, an audible alarm triggers, the backlight flashes, and the integrated stopwatch restarts to show the technician how long the system has maintained a deep vacuum. You can set both high and low alarms. And the timer can display how long it took to get to the alarm and how long the vacuum has been maintained.
Rate Calculator
– View how fast system pressure is rising or falling
Schrader Depressor
– Minimizes leaks by reducing connections
1 Micron Resolution, 0 – 9999 Micron Range
Units of measure: microns (µm) of mercury, mmHg, mbar, mTorr, Torr, and pascals
Alarms and Stopwatch
– Be alerted when system drops to desired level, and know how long it tookSKU: ET-FP-SVG3 -
Filter Flag Indicator & Hour Meter Package
Filter Flag Indicator & Hour Meter Package
Filter Flag Indicator & Hour Meter Package
Filter Flag Indicator & Hour Meter Package includes the following products.
1. PEM CS200 Filter Flag Indicator
2. REXX HM-1 Hour Meter
3. H300 Plastic Case for PEM CS200 Filter Flag Indicator & REXX HM-1 Hour MeterSKU: DPC-PEM-HM-1-H300 -
Portable Air Conditioner
German Pool PAC-215 Portable Air Conditioner
German Pool PAC-215 Portable Air Conditioner
A Mobile Air Conditioner for Home and Offices
Portable Air Con offers high mobility, and is not restricted to any specific indoor locations. Be it bedroom, kitchen or office, air conditioning comes to you when there is a power plug.Application Scenario
Workspace
A portable air con makes a comfortable workspace
by relaying breeze to where the central air con system struggles to reach.Office
Fair stalls or shroff offices may not always fit a traditional air con.
A portable air con unit is here to helpHome
A portable air con works anywhere with a power plug
serving the duty of a window type air con in the event of exterior wall maintenance.– No installation required; mobile around your home / office
– 2-in-1 cooling and heating function
– Cooling Capacity: BTU14,000 BTU / hr
– Heating Capacity: BTU10,000 BTU / hr
– Eco Friendly R410A refrigerant
– Dehumidifying function; sleep and timer settings
– Self-evaporative system for saving energy
– Easy operation with multifunctional remote controlSpecification:
Model: PAC-215
Voltage: 220-240 V / 50 Hz
Power: (Max)1900 W
Cooling Capacity: BTU14,000 BTU / hr
Heating Capacity: BTU10,000 BTU / hr
Cooling Capacity: kW4.1 kW
Cooling Capacity: HP1½ HP
Colour: White
Dimensions: (H) 720 (W) 440 (D) 369 mm
Packing Dimensions: (H) 885 (W) 478 (D) 402 mm
Net Weight: 32 kgFunctions & Features
Dehumidifying Cap. (Manufacturer Standard) *: 76.8 L/Day
Cooling Coverage Area**: 16-27 m²
Airflow Volume: 330 m³/h
Number of Cooling Modes: 4* Manufacturer Standard: 35°C, RH 80%
** Actual cooling coverage area size is subject to room and weather conditions.SKU: n/a -
Glass wool
Glass wool (roll packing, size 25mm x 1.2M x 15M, weight 32Kg)
Glass wool (roll packing, size 25mm x 1.2M x 15M, weight 32Kg)
Glass wool is an insulating material made from fibres of glass arranged using a binder into a texture similar to wool. The process traps many small pockets of air between the glass, and these small air pockets result in high thermal insulation properties. Glass wool is produced in rolls or in slabs, with different thermal and mechanical properties. It may also be produced as a material that can be sprayed or applied in place, on the surface to be insulated.
(Source from wikipedia.org)
*Product pictures are for reference only
SKU: FT-GA1625 -
Condensate Removal Pump
GOBI II Condensate Pump
Technical Data:
Maximum flow rate:
11 GPH (42 l/h.)
Maximum suction:
10 ft. (3 m) self priming
Maximum head: 65.60 ft. (20 m)
Sound: 20dBA at 3 ft. (1 m) / 19dBA at 1 EN ISO 3744:2010
Wireless access:
Remote wireless access with smartphone (optional feature)
Voltage:
100 ~ 240 VAC 50/60 Hz auto sensing universal power input
Power:
8 watts during maximum operation at 110V
Alarm relay:
10 Amps NO/NC contacts with integratedd replaceable HRC 10A fuse 5 × 20 mm
Weight:
1.3 Lbs. (600g)
Discharge star tube: 1/4“ I.D. (6.25 mm) × 3.3 ft. (1 m)
Protection: Class II double insulation, Fully potted, IP-44
Operation temp:
Ambient 37.5°F to 104°F (3°C to 40°C) / Water 41°F to 77°F (5°C to 25°C)
Compliance: Conforms to UL:778 and certfied to CSA C22.2#68SKU: WP-RF-3004045
-
Infrared Thermometer
Fieldpiece SIG1 Gun Style Infrared Thermometer
Fieldpiece SIG1 Gun Style Infrared Thermometer
The SIG1 thermometer is a low cost, standalone non-contact infrared thermometer. Simply aim the thermometer at the target and pull the “trigger” to display the surface temperature. The temperature measured will be the average of all the temperatures in the field of view. The closer you are to the target, the smaller the area. The further away, the larger the area measured.
Applications
The infrared temperature measurement is fast and easy. It works best for fast readings, relative readings (one to another or the same one at different times), or temperature readings of hard to reach places. The following are some applications:
– “Shoot” an inside wall for quick and fast indoor ambient temperature reading.
– Heating and air conditioning where fast and/or easy measurement is most important.
– Motor bearings: high temperature can indicate bearings that might need replacement.
– Circuit breakers: a circuit breaker that is not operating properly can get hot. By scanning a panel, you will be able to find the hot one.
– Poor power line connections: a bad connection can get hot.Specifications
Temperature range: -22 to 1022°F (-30 to 550°C)
Resolution: 1°F
Response time: 0.25 second
Emissivity: Fixed 0.95
Battery: Standard 9V
Battery life: 9 hrs typical, laser and backlight
Operating temperature: 32 to 122°F (0 to 50°C)
Storage temperature: -4 to 140oF (-20 to 60°C)
Accuracy:
±2%rdg (213 to 1022°F) (100 to 550°C),
±4°F (-22 to 212°F) ±2°C (-30 to 100°C)
Field of view: 10:1
Wave length: Red (630~670nm)
Power out: <1mW, class 2 laser product
Display: 1999 count 3.5 digit LCD
Auto-off: Approx. 10 seconds
Weight: 157g (with battery)
Dimensions: 5.83” x 4.13” x 1.65” (15.81cm x10.5cm x 4.19cm)
Accessories: Protective cover with strap, battery (installed), and operator’s manual. -
Infrared Refrigerant Leak Detector
Fieldpiece SRL2K7 Infrared Refrigerant Leak Detector
Fieldpiece SRL2K7 Infrared Refrigerant Leak Detector
– Sensitivity better than 0.1 oz/yr
– Triggers on all CFCs, HFCs, HCFCs and blends.
– Auto recalibration
– Sealed sensor. Unlike heated diode and corona discharge leak detectors, the sensor doesn’t “touch” refrigerant as it passes through the instrument. Heated diode and corona discharge units tend to degrade or fail when they come in contact with high concentrations of refrigerant or touch liquid.
– Doesn’t trigger on oil or moisture like other types of detectors.
– Senses change in refrigerant levels. Works even in contaminated environments.
– Up and running in less than 30 seconds. Some heated elements and corona discharge units take much longer to warm up. UV dyes can take several hours to travel through a running system and can degrade system components.Designed for HVACR
– Superior Controlled Sensitivity. Doesn’t trigger on nuisance leaks unless in Turbo Mode.
– Rugged / Ergonomic Features. Ruggedized boot and it fit’s in your hand.
– Infrared Sensor. Lasts up to 10 years.
– Three Sensitivity Levels. Meets new SAE standards.
– Audible/Visual Alarm. Turn the beep on or off – you decide.
– Lithium Ion Battery (3.7V DC). Deliver around 8 hours of use per charge. Works while charging.
– Non-conductive, Sturdy Probe. Stays where you want it.
– Peak / Mute Buttons. Find leaks in noisy environments.
– Magnetic Hanger. Hang the unit while you repair the leak.
– Weighs 14oz. Tough doesn’t have to mean heavy.Delivery Scope:
– Advanced Refrigerant Leak Detector – SRL2(K7)
– Include chargers for the truck and the shop
– (5) O-rings and 10 Replacement Filters – RFL2
– 9-inch Flex-Probe Extension – RFE2
– Rigid Extension Probe – RRE2
– Blow-Molded Case – ABMK3
– Operator’s Manual -
Vacuum Gauges
Fieldpiece SVG3 Digital Micron Vacuum Gauge
Fieldpiece SVG3 Digital Micron Vacuum Gauge
Fieldpiece SVG3 Digital Micron Vacuum Gauge is a compact, rugged gauge that is loaded with features HVACR professionals need to help them do more. It includes a large, dual display with a rate indicator, alarms, timer, rugged rubberized case, and a hook at strap that allows the vacuum gauge to be hung at any angle.
Fieldpiece SVG3 contains features to make evacuations easier and faster. The display has a bright backlight for high visibility in any situation. To minimize leaks the SVG3 has a schrader depressor that can connect directly to your core removal tool, or directly to the service port. Fewer connections reduce the potential for leaks unrelated to the system. The rate indicator helps determine if there are any leaks within the system.
When the vacuum reaches the low alarm set point, an audible alarm triggers, the backlight flashes, and the integrated stopwatch restarts to show the technician how long the system has maintained a deep vacuum. You can set both high and low alarms. And the timer can display how long it took to get to the alarm and how long the vacuum has been maintained.
Rate Calculator
– View how fast system pressure is rising or falling
Schrader Depressor
– Minimizes leaks by reducing connections
1 Micron Resolution, 0 – 9999 Micron Range
Units of measure: microns (µm) of mercury, mmHg, mbar, mTorr, Torr, and pascals
Alarms and Stopwatch
– Be alerted when system drops to desired level, and know how long it took -
Filter Flag Indicator & Hour Meter Package
Filter Flag Indicator & Hour Meter Package
Filter Flag Indicator & Hour Meter Package
Filter Flag Indicator & Hour Meter Package includes the following products.
1. PEM CS200 Filter Flag Indicator
2. REXX HM-1 Hour Meter
3. H300 Plastic Case for PEM CS200 Filter Flag Indicator & REXX HM-1 Hour Meter -
Portable Air Conditioner
German Pool PAC-215 Portable Air Conditioner
German Pool PAC-215 Portable Air Conditioner
A Mobile Air Conditioner for Home and Offices
Portable Air Con offers high mobility, and is not restricted to any specific indoor locations. Be it bedroom, kitchen or office, air conditioning comes to you when there is a power plug.Application Scenario
Workspace
A portable air con makes a comfortable workspace
by relaying breeze to where the central air con system struggles to reach.Office
Fair stalls or shroff offices may not always fit a traditional air con.
A portable air con unit is here to helpHome
A portable air con works anywhere with a power plug
serving the duty of a window type air con in the event of exterior wall maintenance.– No installation required; mobile around your home / office
– 2-in-1 cooling and heating function
– Cooling Capacity: BTU14,000 BTU / hr
– Heating Capacity: BTU10,000 BTU / hr
– Eco Friendly R410A refrigerant
– Dehumidifying function; sleep and timer settings
– Self-evaporative system for saving energy
– Easy operation with multifunctional remote controlSpecification:
Model: PAC-215
Voltage: 220-240 V / 50 Hz
Power: (Max)1900 W
Cooling Capacity: BTU14,000 BTU / hr
Heating Capacity: BTU10,000 BTU / hr
Cooling Capacity: kW4.1 kW
Cooling Capacity: HP1½ HP
Colour: White
Dimensions: (H) 720 (W) 440 (D) 369 mm
Packing Dimensions: (H) 885 (W) 478 (D) 402 mm
Net Weight: 32 kgFunctions & Features
Dehumidifying Cap. (Manufacturer Standard) *: 76.8 L/Day
Cooling Coverage Area**: 16-27 m²
Airflow Volume: 330 m³/h
Number of Cooling Modes: 4* Manufacturer Standard: 35°C, RH 80%
** Actual cooling coverage area size is subject to room and weather conditions. -
Glass wool
Glass wool (roll packing, size 25mm x 1.2M x 15M, weight 32Kg)
Glass wool (roll packing, size 25mm x 1.2M x 15M, weight 32Kg)
Glass wool is an insulating material made from fibres of glass arranged using a binder into a texture similar to wool. The process traps many small pockets of air between the glass, and these small air pockets result in high thermal insulation properties. Glass wool is produced in rolls or in slabs, with different thermal and mechanical properties. It may also be produced as a material that can be sprayed or applied in place, on the surface to be insulated.
(Source from wikipedia.org)
*Product pictures are for reference only
-
Condensate Removal Pump
GOBI II Condensate Pump
Technical Data:
Maximum flow rate:
11 GPH (42 l/h.)
Maximum suction:
10 ft. (3 m) self priming
Maximum head: 65.60 ft. (20 m)
Sound: 20dBA at 3 ft. (1 m) / 19dBA at 1 EN ISO 3744:2010
Wireless access:
Remote wireless access with smartphone (optional feature)
Voltage:
100 ~ 240 VAC 50/60 Hz auto sensing universal power input
Power:
8 watts during maximum operation at 110V
Alarm relay:
10 Amps NO/NC contacts with integratedd replaceable HRC 10A fuse 5 × 20 mm
Weight:
1.3 Lbs. (600g)
Discharge star tube: 1/4“ I.D. (6.25 mm) × 3.3 ft. (1 m)
Protection: Class II double insulation, Fully potted, IP-44
Operation temp:
Ambient 37.5°F to 104°F (3°C to 40°C) / Water 41°F to 77°F (5°C to 25°C)
Compliance: Conforms to UL:778 and certfied to CSA C22.2#68
-
Infrared Thermometer
Fieldpiece SIG1 Gun Style Infrared Thermometer
Fieldpiece SIG1 Gun Style Infrared Thermometer
The SIG1 thermometer is a low cost, standalone non-contact infrared thermometer. Simply aim the thermometer at the target and pull the “trigger” to display the surface temperature. The temperature measured will be the average of all the temperatures in the field of view. The closer you are to the target, the smaller the area. The further away, the larger the area measured.
Applications
The infrared temperature measurement is fast and easy. It works best for fast readings, relative readings (one to another or the same one at different times), or temperature readings of hard to reach places. The following are some applications:
– “Shoot” an inside wall for quick and fast indoor ambient temperature reading.
– Heating and air conditioning where fast and/or easy measurement is most important.
– Motor bearings: high temperature can indicate bearings that might need replacement.
– Circuit breakers: a circuit breaker that is not operating properly can get hot. By scanning a panel, you will be able to find the hot one.
– Poor power line connections: a bad connection can get hot.Specifications
Temperature range: -22 to 1022°F (-30 to 550°C)
Resolution: 1°F
Response time: 0.25 second
Emissivity: Fixed 0.95
Battery: Standard 9V
Battery life: 9 hrs typical, laser and backlight
Operating temperature: 32 to 122°F (0 to 50°C)
Storage temperature: -4 to 140oF (-20 to 60°C)
Accuracy:
±2%rdg (213 to 1022°F) (100 to 550°C),
±4°F (-22 to 212°F) ±2°C (-30 to 100°C)
Field of view: 10:1
Wave length: Red (630~670nm)
Power out: <1mW, class 2 laser product
Display: 1999 count 3.5 digit LCD
Auto-off: Approx. 10 seconds
Weight: 157g (with battery)
Dimensions: 5.83” x 4.13” x 1.65” (15.81cm x10.5cm x 4.19cm)
Accessories: Protective cover with strap, battery (installed), and operator’s manual. -
Infrared Refrigerant Leak Detector
Fieldpiece SRL2K7 Infrared Refrigerant Leak Detector
Fieldpiece SRL2K7 Infrared Refrigerant Leak Detector
– Sensitivity better than 0.1 oz/yr
– Triggers on all CFCs, HFCs, HCFCs and blends.
– Auto recalibration
– Sealed sensor. Unlike heated diode and corona discharge leak detectors, the sensor doesn’t “touch” refrigerant as it passes through the instrument. Heated diode and corona discharge units tend to degrade or fail when they come in contact with high concentrations of refrigerant or touch liquid.
– Doesn’t trigger on oil or moisture like other types of detectors.
– Senses change in refrigerant levels. Works even in contaminated environments.
– Up and running in less than 30 seconds. Some heated elements and corona discharge units take much longer to warm up. UV dyes can take several hours to travel through a running system and can degrade system components.Designed for HVACR
– Superior Controlled Sensitivity. Doesn’t trigger on nuisance leaks unless in Turbo Mode.
– Rugged / Ergonomic Features. Ruggedized boot and it fit’s in your hand.
– Infrared Sensor. Lasts up to 10 years.
– Three Sensitivity Levels. Meets new SAE standards.
– Audible/Visual Alarm. Turn the beep on or off – you decide.
– Lithium Ion Battery (3.7V DC). Deliver around 8 hours of use per charge. Works while charging.
– Non-conductive, Sturdy Probe. Stays where you want it.
– Peak / Mute Buttons. Find leaks in noisy environments.
– Magnetic Hanger. Hang the unit while you repair the leak.
– Weighs 14oz. Tough doesn’t have to mean heavy.Delivery Scope:
– Advanced Refrigerant Leak Detector – SRL2(K7)
– Include chargers for the truck and the shop
– (5) O-rings and 10 Replacement Filters – RFL2
– 9-inch Flex-Probe Extension – RFE2
– Rigid Extension Probe – RRE2
– Blow-Molded Case – ABMK3
– Operator’s Manual -
Vacuum Gauges
Fieldpiece SVG3 Digital Micron Vacuum Gauge
Fieldpiece SVG3 Digital Micron Vacuum Gauge
Fieldpiece SVG3 Digital Micron Vacuum Gauge is a compact, rugged gauge that is loaded with features HVACR professionals need to help them do more. It includes a large, dual display with a rate indicator, alarms, timer, rugged rubberized case, and a hook at strap that allows the vacuum gauge to be hung at any angle.
Fieldpiece SVG3 contains features to make evacuations easier and faster. The display has a bright backlight for high visibility in any situation. To minimize leaks the SVG3 has a schrader depressor that can connect directly to your core removal tool, or directly to the service port. Fewer connections reduce the potential for leaks unrelated to the system. The rate indicator helps determine if there are any leaks within the system.
When the vacuum reaches the low alarm set point, an audible alarm triggers, the backlight flashes, and the integrated stopwatch restarts to show the technician how long the system has maintained a deep vacuum. You can set both high and low alarms. And the timer can display how long it took to get to the alarm and how long the vacuum has been maintained.
Rate Calculator
– View how fast system pressure is rising or falling
Schrader Depressor
– Minimizes leaks by reducing connections
1 Micron Resolution, 0 – 9999 Micron Range
Units of measure: microns (µm) of mercury, mmHg, mbar, mTorr, Torr, and pascals
Alarms and Stopwatch
– Be alerted when system drops to desired level, and know how long it took -
Filter Flag Indicator & Hour Meter Package
Filter Flag Indicator & Hour Meter Package
Filter Flag Indicator & Hour Meter Package
Filter Flag Indicator & Hour Meter Package includes the following products.
1. PEM CS200 Filter Flag Indicator
2. REXX HM-1 Hour Meter
3. H300 Plastic Case for PEM CS200 Filter Flag Indicator & REXX HM-1 Hour Meter -
Portable Air Conditioner
German Pool PAC-215 Portable Air Conditioner
German Pool PAC-215 Portable Air Conditioner
A Mobile Air Conditioner for Home and Offices
Portable Air Con offers high mobility, and is not restricted to any specific indoor locations. Be it bedroom, kitchen or office, air conditioning comes to you when there is a power plug.Application Scenario
Workspace
A portable air con makes a comfortable workspace
by relaying breeze to where the central air con system struggles to reach.Office
Fair stalls or shroff offices may not always fit a traditional air con.
A portable air con unit is here to helpHome
A portable air con works anywhere with a power plug
serving the duty of a window type air con in the event of exterior wall maintenance.– No installation required; mobile around your home / office
– 2-in-1 cooling and heating function
– Cooling Capacity: BTU14,000 BTU / hr
– Heating Capacity: BTU10,000 BTU / hr
– Eco Friendly R410A refrigerant
– Dehumidifying function; sleep and timer settings
– Self-evaporative system for saving energy
– Easy operation with multifunctional remote controlSpecification:
Model: PAC-215
Voltage: 220-240 V / 50 Hz
Power: (Max)1900 W
Cooling Capacity: BTU14,000 BTU / hr
Heating Capacity: BTU10,000 BTU / hr
Cooling Capacity: kW4.1 kW
Cooling Capacity: HP1½ HP
Colour: White
Dimensions: (H) 720 (W) 440 (D) 369 mm
Packing Dimensions: (H) 885 (W) 478 (D) 402 mm
Net Weight: 32 kgFunctions & Features
Dehumidifying Cap. (Manufacturer Standard) *: 76.8 L/Day
Cooling Coverage Area**: 16-27 m²
Airflow Volume: 330 m³/h
Number of Cooling Modes: 4* Manufacturer Standard: 35°C, RH 80%
** Actual cooling coverage area size is subject to room and weather conditions. -
Glass wool
Glass wool (roll packing, size 25mm x 1.2M x 15M, weight 32Kg)
Glass wool (roll packing, size 25mm x 1.2M x 15M, weight 32Kg)
Glass wool is an insulating material made from fibres of glass arranged using a binder into a texture similar to wool. The process traps many small pockets of air between the glass, and these small air pockets result in high thermal insulation properties. Glass wool is produced in rolls or in slabs, with different thermal and mechanical properties. It may also be produced as a material that can be sprayed or applied in place, on the surface to be insulated.
(Source from wikipedia.org)
*Product pictures are for reference only
-
Condensate Removal Pump
GOBI II Condensate Pump
Technical Data:
Maximum flow rate:
11 GPH (42 l/h.)
Maximum suction:
10 ft. (3 m) self priming
Maximum head: 65.60 ft. (20 m)
Sound: 20dBA at 3 ft. (1 m) / 19dBA at 1 EN ISO 3744:2010
Wireless access:
Remote wireless access with smartphone (optional feature)
Voltage:
100 ~ 240 VAC 50/60 Hz auto sensing universal power input
Power:
8 watts during maximum operation at 110V
Alarm relay:
10 Amps NO/NC contacts with integratedd replaceable HRC 10A fuse 5 × 20 mm
Weight:
1.3 Lbs. (600g)
Discharge star tube: 1/4“ I.D. (6.25 mm) × 3.3 ft. (1 m)
Protection: Class II double insulation, Fully potted, IP-44
Operation temp:
Ambient 37.5°F to 104°F (3°C to 40°C) / Water 41°F to 77°F (5°C to 25°C)
Compliance: Conforms to UL:778 and certfied to CSA C22.2#68
