Temperature Sensor
Showing all 3 results
-
Temperature Sensor
testo 0609 1773 Efficient, rugged air probe, Pt100
testo 0609 1773 Efficient, rugged air probe, Pt100
Made in Germany
Specification:
Measuring range: -50 to +400 °C
Accuracy: Class A (-50 to +300 °C), Class B (Remaining Range) ¹⁾
Reaction time: 70 sec
1) According to standard 60751, the accuracies of Class A and B refer to -200 to +600 °C (Pt100)General technical data:
Length probe shaft: 114mm
Fixed cable: yes
Cable length: 1.2m
Diameter probe shaft tip: 4mm
Diameter probe shaft: 5mm
Length probe shaft tip: 50mmSKU: TT-TO-0609-1773 -
Temperature Sensor
testo 0610-1725 Temperature probe with a long cable for measurements in liquids, pastes and in air – Accurate immersion/penetration probe
testo 0610-1725 Temperature probe with a long cable for measurements in liquids, pastes and in air – Accurate immersion/penetration probe
Made in Germany
Temperature probe with a long cable for measurements in liquids, pastes and in air.
– NTC probe with exceptionally long 6 m cable, can be installed for long-term measurements
– For connection to the testo Saveris 2-T2 Wi-Fi data logger
– Measuring range: -31 to 176 °F (-35 to +80 °C)The temperature probe featuring a long cable and flat tip is suitable for measurements in liquids and pastes as well as for air temperature measurements. Thanks to its NTC sensor element, the probe provides precise temperature measurements with an accuracy of up to ±0.36 °F (±0.2 °C).
The temperature probe features a 6 m cable. This exceptionally long cable means that it can also be used at measuring points located a long distance away from the Wi-Fi data logger.
For long-term measurements, you can mount the temperature probe permanently at the measuring location. To do this you only need a clamp or PG gland (not included in delivery).
The temperature probe is waterproof in accordance with protection class IP 67. Consequently, measurements can be taken outdoors for example.
This probe’s response time t99 (time it takes for the probe to register 99% of the jump in temperature) of 5 seconds refers to measurements in moving water at 140 °F (+60 °C). This response time is extended when, for example, measurements are taken in still liquid, pastes or air.*
*For air temperature measurements, the response time is about 40 – 60 times higher than the indicated value measured in water. If you should require a rather sluggish temperature probe to measure air temperature, this probe is particularly suitable because it does not take brief temperature peaks into account at all, or only to a very small degree, when measuring temperature. For example, if you are planning to use this probe to measure air temperature in the refrigerator, briefly opening the refrigerator door would not take into account the temperature fluctuation which results from mixing the warm room temperature with the refrigerator temperature.
If you need an air temperature probe with a fast response time, your best choice would be the exceptionally fast temperature probe 0602 0493 which has a large measuring range. This temperature probe can be connected to the testo Saveris 2-T3 Wi-Fi data logger.
Delivery Scope
1 x NTC temperature probe 0610 1725, can be connected to the testo Saveris 2-T2 Wi-Fi data loggerSKU: ET-TO-0610-1725 -
Temperature Sensor
testo 0613 1912 Waterproof surface probe for flat surfaces – NTC
testo 0613 1912 Waterproof surface probe for flat surfaces – NTC
Made in Germany
testo 0613 1912 Waterproof surface probe for flat surfaces – NTC is ideal for measuring the temperature on refrigeration systems, in cold storage rooms, in cold storage warehouses and also outdoors. Its integrated NTC sensor means that you can also count on accurate measurement results at low temperatures.
Specification:
Measuring range: -50 ~ +150 °C *Accuracy:
±0.5% (100 ~ +150°C)
±0.2 °C (-25 ~ +74.9°C)
±0.4°C (Remaining Range)Reaction time: 35 sec
* Long-term measurement range +125°C, short-term +150°C or +140°C (2 minutes)
Delivery Scope
Waterproof surface temperature probe (NTC) with fixed cable 1.2 m.SKU: ET-TO-06131912
-
Temperature Sensor
testo 0609 1773 Efficient, rugged air probe, Pt100
testo 0609 1773 Efficient, rugged air probe, Pt100
Made in Germany
Specification:
Measuring range: -50 to +400 °C
Accuracy: Class A (-50 to +300 °C), Class B (Remaining Range) ¹⁾
Reaction time: 70 sec
1) According to standard 60751, the accuracies of Class A and B refer to -200 to +600 °C (Pt100)General technical data:
Length probe shaft: 114mm
Fixed cable: yes
Cable length: 1.2m
Diameter probe shaft tip: 4mm
Diameter probe shaft: 5mm
Length probe shaft tip: 50mm -
Temperature Sensor
testo 0610-1725 Temperature probe with a long cable for measurements in liquids, pastes and in air – Accurate immersion/penetration probe
testo 0610-1725 Temperature probe with a long cable for measurements in liquids, pastes and in air – Accurate immersion/penetration probe
Made in Germany
Temperature probe with a long cable for measurements in liquids, pastes and in air.
– NTC probe with exceptionally long 6 m cable, can be installed for long-term measurements
– For connection to the testo Saveris 2-T2 Wi-Fi data logger
– Measuring range: -31 to 176 °F (-35 to +80 °C)The temperature probe featuring a long cable and flat tip is suitable for measurements in liquids and pastes as well as for air temperature measurements. Thanks to its NTC sensor element, the probe provides precise temperature measurements with an accuracy of up to ±0.36 °F (±0.2 °C).
The temperature probe features a 6 m cable. This exceptionally long cable means that it can also be used at measuring points located a long distance away from the Wi-Fi data logger.
For long-term measurements, you can mount the temperature probe permanently at the measuring location. To do this you only need a clamp or PG gland (not included in delivery).
The temperature probe is waterproof in accordance with protection class IP 67. Consequently, measurements can be taken outdoors for example.
This probe’s response time t99 (time it takes for the probe to register 99% of the jump in temperature) of 5 seconds refers to measurements in moving water at 140 °F (+60 °C). This response time is extended when, for example, measurements are taken in still liquid, pastes or air.*
*For air temperature measurements, the response time is about 40 – 60 times higher than the indicated value measured in water. If you should require a rather sluggish temperature probe to measure air temperature, this probe is particularly suitable because it does not take brief temperature peaks into account at all, or only to a very small degree, when measuring temperature. For example, if you are planning to use this probe to measure air temperature in the refrigerator, briefly opening the refrigerator door would not take into account the temperature fluctuation which results from mixing the warm room temperature with the refrigerator temperature.
If you need an air temperature probe with a fast response time, your best choice would be the exceptionally fast temperature probe 0602 0493 which has a large measuring range. This temperature probe can be connected to the testo Saveris 2-T3 Wi-Fi data logger.
Delivery Scope
1 x NTC temperature probe 0610 1725, can be connected to the testo Saveris 2-T2 Wi-Fi data logger -
Temperature Sensor
testo 0613 1912 Waterproof surface probe for flat surfaces – NTC
testo 0613 1912 Waterproof surface probe for flat surfaces – NTC
Made in Germany
testo 0613 1912 Waterproof surface probe for flat surfaces – NTC is ideal for measuring the temperature on refrigeration systems, in cold storage rooms, in cold storage warehouses and also outdoors. Its integrated NTC sensor means that you can also count on accurate measurement results at low temperatures.
Specification:
Measuring range: -50 ~ +150 °C *Accuracy:
±0.5% (100 ~ +150°C)
±0.2 °C (-25 ~ +74.9°C)
±0.4°C (Remaining Range)Reaction time: 35 sec
* Long-term measurement range +125°C, short-term +150°C or +140°C (2 minutes)
Delivery Scope
Waterproof surface temperature probe (NTC) with fixed cable 1.2 m.
-
Temperature Sensor
testo 0609 1773 Efficient, rugged air probe, Pt100
testo 0609 1773 Efficient, rugged air probe, Pt100
Made in Germany
Specification:
Measuring range: -50 to +400 °C
Accuracy: Class A (-50 to +300 °C), Class B (Remaining Range) ¹⁾
Reaction time: 70 sec
1) According to standard 60751, the accuracies of Class A and B refer to -200 to +600 °C (Pt100)General technical data:
Length probe shaft: 114mm
Fixed cable: yes
Cable length: 1.2m
Diameter probe shaft tip: 4mm
Diameter probe shaft: 5mm
Length probe shaft tip: 50mm -
Temperature Sensor
testo 0610-1725 Temperature probe with a long cable for measurements in liquids, pastes and in air – Accurate immersion/penetration probe
testo 0610-1725 Temperature probe with a long cable for measurements in liquids, pastes and in air – Accurate immersion/penetration probe
Made in Germany
Temperature probe with a long cable for measurements in liquids, pastes and in air.
– NTC probe with exceptionally long 6 m cable, can be installed for long-term measurements
– For connection to the testo Saveris 2-T2 Wi-Fi data logger
– Measuring range: -31 to 176 °F (-35 to +80 °C)The temperature probe featuring a long cable and flat tip is suitable for measurements in liquids and pastes as well as for air temperature measurements. Thanks to its NTC sensor element, the probe provides precise temperature measurements with an accuracy of up to ±0.36 °F (±0.2 °C).
The temperature probe features a 6 m cable. This exceptionally long cable means that it can also be used at measuring points located a long distance away from the Wi-Fi data logger.
For long-term measurements, you can mount the temperature probe permanently at the measuring location. To do this you only need a clamp or PG gland (not included in delivery).
The temperature probe is waterproof in accordance with protection class IP 67. Consequently, measurements can be taken outdoors for example.
This probe’s response time t99 (time it takes for the probe to register 99% of the jump in temperature) of 5 seconds refers to measurements in moving water at 140 °F (+60 °C). This response time is extended when, for example, measurements are taken in still liquid, pastes or air.*
*For air temperature measurements, the response time is about 40 – 60 times higher than the indicated value measured in water. If you should require a rather sluggish temperature probe to measure air temperature, this probe is particularly suitable because it does not take brief temperature peaks into account at all, or only to a very small degree, when measuring temperature. For example, if you are planning to use this probe to measure air temperature in the refrigerator, briefly opening the refrigerator door would not take into account the temperature fluctuation which results from mixing the warm room temperature with the refrigerator temperature.
If you need an air temperature probe with a fast response time, your best choice would be the exceptionally fast temperature probe 0602 0493 which has a large measuring range. This temperature probe can be connected to the testo Saveris 2-T3 Wi-Fi data logger.
Delivery Scope
1 x NTC temperature probe 0610 1725, can be connected to the testo Saveris 2-T2 Wi-Fi data logger -
Temperature Sensor
testo 0613 1912 Waterproof surface probe for flat surfaces – NTC
testo 0613 1912 Waterproof surface probe for flat surfaces – NTC
Made in Germany
testo 0613 1912 Waterproof surface probe for flat surfaces – NTC is ideal for measuring the temperature on refrigeration systems, in cold storage rooms, in cold storage warehouses and also outdoors. Its integrated NTC sensor means that you can also count on accurate measurement results at low temperatures.
Specification:
Measuring range: -50 ~ +150 °C *Accuracy:
±0.5% (100 ~ +150°C)
±0.2 °C (-25 ~ +74.9°C)
±0.4°C (Remaining Range)Reaction time: 35 sec
* Long-term measurement range +125°C, short-term +150°C or +140°C (2 minutes)
Delivery Scope
Waterproof surface temperature probe (NTC) with fixed cable 1.2 m.