-
×
Castel 3120/17 Check Valve 2-1/8"ODS
1 × $1,695.00
Subtotal: $1,695.00
fieldpiece
Showing all 12 results
-
Infrared Thermometer
Fieldpiece SIG1 Gun Style Infrared Thermometer
Fieldpiece SIG1 Gun Style Infrared Thermometer
The SIG1 thermometer is a low cost, standalone non-contact infrared thermometer. Simply aim the thermometer at the target and pull the “trigger” to display the surface temperature. The temperature measured will be the average of all the temperatures in the field of view. The closer you are to the target, the smaller the area. The further away, the larger the area measured.
Applications
The infrared temperature measurement is fast and easy. It works best for fast readings, relative readings (one to another or the same one at different times), or temperature readings of hard to reach places. The following are some applications:
– “Shoot” an inside wall for quick and fast indoor ambient temperature reading.
– Heating and air conditioning where fast and/or easy measurement is most important.
– Motor bearings: high temperature can indicate bearings that might need replacement.
– Circuit breakers: a circuit breaker that is not operating properly can get hot. By scanning a panel, you will be able to find the hot one.
– Poor power line connections: a bad connection can get hot.Specifications
Temperature range: -22 to 1022°F (-30 to 550°C)
Resolution: 1°F
Response time: 0.25 second
Emissivity: Fixed 0.95
Battery: Standard 9V
Battery life: 9 hrs typical, laser and backlight
Operating temperature: 32 to 122°F (0 to 50°C)
Storage temperature: -4 to 140oF (-20 to 60°C)
Accuracy:
±2%rdg (213 to 1022°F) (100 to 550°C),
±4°F (-22 to 212°F) ±2°C (-30 to 100°C)
Field of view: 10:1
Wave length: Red (630~670nm)
Power out: <1mW, class 2 laser product
Display: 1999 count 3.5 digit LCD
Auto-off: Approx. 10 seconds
Weight: 157g (with battery)
Dimensions: 5.83” x 4.13” x 1.65” (15.81cm x10.5cm x 4.19cm)
Accessories: Protective cover with strap, battery (installed), and operator’s manual.SKU: ET-FP-SIG1 -
Infrared Refrigerant Leak Detector
Fieldpiece SRL2K7 Infrared Refrigerant Leak Detector
Fieldpiece SRL2K7 Infrared Refrigerant Leak Detector
– Sensitivity better than 0.1 oz/yr
– Triggers on all CFCs, HFCs, HCFCs and blends.
– Auto recalibration
– Sealed sensor. Unlike heated diode and corona discharge leak detectors, the sensor doesn’t “touch” refrigerant as it passes through the instrument. Heated diode and corona discharge units tend to degrade or fail when they come in contact with high concentrations of refrigerant or touch liquid.
– Doesn’t trigger on oil or moisture like other types of detectors.
– Senses change in refrigerant levels. Works even in contaminated environments.
– Up and running in less than 30 seconds. Some heated elements and corona discharge units take much longer to warm up. UV dyes can take several hours to travel through a running system and can degrade system components.Designed for HVACR
– Superior Controlled Sensitivity. Doesn’t trigger on nuisance leaks unless in Turbo Mode.
– Rugged / Ergonomic Features. Ruggedized boot and it fit’s in your hand.
– Infrared Sensor. Lasts up to 10 years.
– Three Sensitivity Levels. Meets new SAE standards.
– Audible/Visual Alarm. Turn the beep on or off – you decide.
– Lithium Ion Battery (3.7V DC). Deliver around 8 hours of use per charge. Works while charging.
– Non-conductive, Sturdy Probe. Stays where you want it.
– Peak / Mute Buttons. Find leaks in noisy environments.
– Magnetic Hanger. Hang the unit while you repair the leak.
– Weighs 14oz. Tough doesn’t have to mean heavy.Delivery Scope:
– Advanced Refrigerant Leak Detector – SRL2(K7)
– Include chargers for the truck and the shop
– (5) O-rings and 10 Replacement Filters – RFL2
– 9-inch Flex-Probe Extension – RFE2
– Rigid Extension Probe – RRE2
– Blow-Molded Case – ABMK3
– Operator’s ManualSKU: ET-FP-SRL2K7 -
Vacuum Gauges
Fieldpiece SVG3 Digital Micron Vacuum Gauge
Fieldpiece SVG3 Digital Micron Vacuum Gauge
Fieldpiece SVG3 Digital Micron Vacuum Gauge is a compact, rugged gauge that is loaded with features HVACR professionals need to help them do more. It includes a large, dual display with a rate indicator, alarms, timer, rugged rubberized case, and a hook at strap that allows the vacuum gauge to be hung at any angle.
Fieldpiece SVG3 contains features to make evacuations easier and faster. The display has a bright backlight for high visibility in any situation. To minimize leaks the SVG3 has a schrader depressor that can connect directly to your core removal tool, or directly to the service port. Fewer connections reduce the potential for leaks unrelated to the system. The rate indicator helps determine if there are any leaks within the system.
When the vacuum reaches the low alarm set point, an audible alarm triggers, the backlight flashes, and the integrated stopwatch restarts to show the technician how long the system has maintained a deep vacuum. You can set both high and low alarms. And the timer can display how long it took to get to the alarm and how long the vacuum has been maintained.
Rate Calculator
– View how fast system pressure is rising or falling
Schrader Depressor
– Minimizes leaks by reducing connections
1 Micron Resolution, 0 – 9999 Micron Range
Units of measure: microns (µm) of mercury, mmHg, mbar, mTorr, Torr, and pascals
Alarms and Stopwatch
– Be alerted when system drops to desired level, and know how long it tookSKU: ET-FP-SVG3 -
Electrical Testing
CO detectors and cracked heat exchangers
The model ACM3 carbon monoxide accessory head enables most digital multimeters to measure low levels of carbon monoxide in parts per million (PPM). It is intended to measure levels of CO in still ambient air. In many cases, it can help pinpoint sources of CO.
SKU: ET-FP-ACM3 -
Electrical Testing
SC460 Wireless Clamp Meter
The SC460 is an essential clamp meter with wireless functionality for the HVACR professional.
Receive wireless measurements from Fieldpiece accessory heads and wireless transmitters from anywhere on the jobsite. For instance, receive an indoor delta T temperature measurement wirelessly from a Fieldpiece transmitter while you work at the condenser. Send your electrical measurements to the Job Link™ mobile app via the Fieldpiece JL2 Transmitter.SKU: ET-FP-SC460 -
Electrical Testing
SC660 Wireless Clamp Meter
The SC660 is the top of the line clamp meter with wireless functionality for the HVACR professional.
Receive wireless measurements from Fieldpiece accessory heads and wireless transmitters from anywhere on the jobsite. For instance, receive an indoor delta T temperature measurement wirelessly from a Fieldpiece transmitter while you work at the condenser. Send your electrical measurements to the Job Link™ mobile app via the Fieldpiece JL2 Transmitter.SKU: ET-FP-SC660 -
Electrical Testing
SNCV1 Non-contact Voltage Detector
This non-contact voltage detector features an analog feel. The closer the probe is to the voltage source,
the louder and brighter the indicators become. Detects AC voltages without contact and features a bright red LED light and buzzer. With a 24VAC to 440VAC range of the SNCV1 offers technicians the ability to test thermostats and other HVAC/R parameter easily. Clips to your shirt pocket and is a quick source to find out whether that line is hot or not.SKU: ET-FP-SNCV1
-
Infrared Thermometer
Fieldpiece SIG1 Gun Style Infrared Thermometer
Fieldpiece SIG1 Gun Style Infrared Thermometer
The SIG1 thermometer is a low cost, standalone non-contact infrared thermometer. Simply aim the thermometer at the target and pull the “trigger” to display the surface temperature. The temperature measured will be the average of all the temperatures in the field of view. The closer you are to the target, the smaller the area. The further away, the larger the area measured.
Applications
The infrared temperature measurement is fast and easy. It works best for fast readings, relative readings (one to another or the same one at different times), or temperature readings of hard to reach places. The following are some applications:
– “Shoot” an inside wall for quick and fast indoor ambient temperature reading.
– Heating and air conditioning where fast and/or easy measurement is most important.
– Motor bearings: high temperature can indicate bearings that might need replacement.
– Circuit breakers: a circuit breaker that is not operating properly can get hot. By scanning a panel, you will be able to find the hot one.
– Poor power line connections: a bad connection can get hot.Specifications
Temperature range: -22 to 1022°F (-30 to 550°C)
Resolution: 1°F
Response time: 0.25 second
Emissivity: Fixed 0.95
Battery: Standard 9V
Battery life: 9 hrs typical, laser and backlight
Operating temperature: 32 to 122°F (0 to 50°C)
Storage temperature: -4 to 140oF (-20 to 60°C)
Accuracy:
±2%rdg (213 to 1022°F) (100 to 550°C),
±4°F (-22 to 212°F) ±2°C (-30 to 100°C)
Field of view: 10:1
Wave length: Red (630~670nm)
Power out: <1mW, class 2 laser product
Display: 1999 count 3.5 digit LCD
Auto-off: Approx. 10 seconds
Weight: 157g (with battery)
Dimensions: 5.83” x 4.13” x 1.65” (15.81cm x10.5cm x 4.19cm)
Accessories: Protective cover with strap, battery (installed), and operator’s manual. -
Infrared Refrigerant Leak Detector
Fieldpiece SRL2K7 Infrared Refrigerant Leak Detector
Fieldpiece SRL2K7 Infrared Refrigerant Leak Detector
– Sensitivity better than 0.1 oz/yr
– Triggers on all CFCs, HFCs, HCFCs and blends.
– Auto recalibration
– Sealed sensor. Unlike heated diode and corona discharge leak detectors, the sensor doesn’t “touch” refrigerant as it passes through the instrument. Heated diode and corona discharge units tend to degrade or fail when they come in contact with high concentrations of refrigerant or touch liquid.
– Doesn’t trigger on oil or moisture like other types of detectors.
– Senses change in refrigerant levels. Works even in contaminated environments.
– Up and running in less than 30 seconds. Some heated elements and corona discharge units take much longer to warm up. UV dyes can take several hours to travel through a running system and can degrade system components.Designed for HVACR
– Superior Controlled Sensitivity. Doesn’t trigger on nuisance leaks unless in Turbo Mode.
– Rugged / Ergonomic Features. Ruggedized boot and it fit’s in your hand.
– Infrared Sensor. Lasts up to 10 years.
– Three Sensitivity Levels. Meets new SAE standards.
– Audible/Visual Alarm. Turn the beep on or off – you decide.
– Lithium Ion Battery (3.7V DC). Deliver around 8 hours of use per charge. Works while charging.
– Non-conductive, Sturdy Probe. Stays where you want it.
– Peak / Mute Buttons. Find leaks in noisy environments.
– Magnetic Hanger. Hang the unit while you repair the leak.
– Weighs 14oz. Tough doesn’t have to mean heavy.Delivery Scope:
– Advanced Refrigerant Leak Detector – SRL2(K7)
– Include chargers for the truck and the shop
– (5) O-rings and 10 Replacement Filters – RFL2
– 9-inch Flex-Probe Extension – RFE2
– Rigid Extension Probe – RRE2
– Blow-Molded Case – ABMK3
– Operator’s Manual -
Vacuum Gauges
Fieldpiece SVG3 Digital Micron Vacuum Gauge
Fieldpiece SVG3 Digital Micron Vacuum Gauge
Fieldpiece SVG3 Digital Micron Vacuum Gauge is a compact, rugged gauge that is loaded with features HVACR professionals need to help them do more. It includes a large, dual display with a rate indicator, alarms, timer, rugged rubberized case, and a hook at strap that allows the vacuum gauge to be hung at any angle.
Fieldpiece SVG3 contains features to make evacuations easier and faster. The display has a bright backlight for high visibility in any situation. To minimize leaks the SVG3 has a schrader depressor that can connect directly to your core removal tool, or directly to the service port. Fewer connections reduce the potential for leaks unrelated to the system. The rate indicator helps determine if there are any leaks within the system.
When the vacuum reaches the low alarm set point, an audible alarm triggers, the backlight flashes, and the integrated stopwatch restarts to show the technician how long the system has maintained a deep vacuum. You can set both high and low alarms. And the timer can display how long it took to get to the alarm and how long the vacuum has been maintained.
Rate Calculator
– View how fast system pressure is rising or falling
Schrader Depressor
– Minimizes leaks by reducing connections
1 Micron Resolution, 0 – 9999 Micron Range
Units of measure: microns (µm) of mercury, mmHg, mbar, mTorr, Torr, and pascals
Alarms and Stopwatch
– Be alerted when system drops to desired level, and know how long it took -
Electrical Testing
CO detectors and cracked heat exchangers
The model ACM3 carbon monoxide accessory head enables most digital multimeters to measure low levels of carbon monoxide in parts per million (PPM). It is intended to measure levels of CO in still ambient air. In many cases, it can help pinpoint sources of CO.
-
Electrical Testing
SC460 Wireless Clamp Meter
The SC460 is an essential clamp meter with wireless functionality for the HVACR professional.
Receive wireless measurements from Fieldpiece accessory heads and wireless transmitters from anywhere on the jobsite. For instance, receive an indoor delta T temperature measurement wirelessly from a Fieldpiece transmitter while you work at the condenser. Send your electrical measurements to the Job Link™ mobile app via the Fieldpiece JL2 Transmitter. -
Electrical Testing
SC660 Wireless Clamp Meter
The SC660 is the top of the line clamp meter with wireless functionality for the HVACR professional.
Receive wireless measurements from Fieldpiece accessory heads and wireless transmitters from anywhere on the jobsite. For instance, receive an indoor delta T temperature measurement wirelessly from a Fieldpiece transmitter while you work at the condenser. Send your electrical measurements to the Job Link™ mobile app via the Fieldpiece JL2 Transmitter. -
Electrical Testing
SNCV1 Non-contact Voltage Detector
This non-contact voltage detector features an analog feel. The closer the probe is to the voltage source,
the louder and brighter the indicators become. Detects AC voltages without contact and features a bright red LED light and buzzer. With a 24VAC to 440VAC range of the SNCV1 offers technicians the ability to test thermostats and other HVAC/R parameter easily. Clips to your shirt pocket and is a quick source to find out whether that line is hot or not.
-
Infrared Thermometer
Fieldpiece SIG1 Gun Style Infrared Thermometer
Fieldpiece SIG1 Gun Style Infrared Thermometer
The SIG1 thermometer is a low cost, standalone non-contact infrared thermometer. Simply aim the thermometer at the target and pull the “trigger” to display the surface temperature. The temperature measured will be the average of all the temperatures in the field of view. The closer you are to the target, the smaller the area. The further away, the larger the area measured.
Applications
The infrared temperature measurement is fast and easy. It works best for fast readings, relative readings (one to another or the same one at different times), or temperature readings of hard to reach places. The following are some applications:
– “Shoot” an inside wall for quick and fast indoor ambient temperature reading.
– Heating and air conditioning where fast and/or easy measurement is most important.
– Motor bearings: high temperature can indicate bearings that might need replacement.
– Circuit breakers: a circuit breaker that is not operating properly can get hot. By scanning a panel, you will be able to find the hot one.
– Poor power line connections: a bad connection can get hot.Specifications
Temperature range: -22 to 1022°F (-30 to 550°C)
Resolution: 1°F
Response time: 0.25 second
Emissivity: Fixed 0.95
Battery: Standard 9V
Battery life: 9 hrs typical, laser and backlight
Operating temperature: 32 to 122°F (0 to 50°C)
Storage temperature: -4 to 140oF (-20 to 60°C)
Accuracy:
±2%rdg (213 to 1022°F) (100 to 550°C),
±4°F (-22 to 212°F) ±2°C (-30 to 100°C)
Field of view: 10:1
Wave length: Red (630~670nm)
Power out: <1mW, class 2 laser product
Display: 1999 count 3.5 digit LCD
Auto-off: Approx. 10 seconds
Weight: 157g (with battery)
Dimensions: 5.83” x 4.13” x 1.65” (15.81cm x10.5cm x 4.19cm)
Accessories: Protective cover with strap, battery (installed), and operator’s manual. -
Infrared Refrigerant Leak Detector
Fieldpiece SRL2K7 Infrared Refrigerant Leak Detector
Fieldpiece SRL2K7 Infrared Refrigerant Leak Detector
– Sensitivity better than 0.1 oz/yr
– Triggers on all CFCs, HFCs, HCFCs and blends.
– Auto recalibration
– Sealed sensor. Unlike heated diode and corona discharge leak detectors, the sensor doesn’t “touch” refrigerant as it passes through the instrument. Heated diode and corona discharge units tend to degrade or fail when they come in contact with high concentrations of refrigerant or touch liquid.
– Doesn’t trigger on oil or moisture like other types of detectors.
– Senses change in refrigerant levels. Works even in contaminated environments.
– Up and running in less than 30 seconds. Some heated elements and corona discharge units take much longer to warm up. UV dyes can take several hours to travel through a running system and can degrade system components.Designed for HVACR
– Superior Controlled Sensitivity. Doesn’t trigger on nuisance leaks unless in Turbo Mode.
– Rugged / Ergonomic Features. Ruggedized boot and it fit’s in your hand.
– Infrared Sensor. Lasts up to 10 years.
– Three Sensitivity Levels. Meets new SAE standards.
– Audible/Visual Alarm. Turn the beep on or off – you decide.
– Lithium Ion Battery (3.7V DC). Deliver around 8 hours of use per charge. Works while charging.
– Non-conductive, Sturdy Probe. Stays where you want it.
– Peak / Mute Buttons. Find leaks in noisy environments.
– Magnetic Hanger. Hang the unit while you repair the leak.
– Weighs 14oz. Tough doesn’t have to mean heavy.Delivery Scope:
– Advanced Refrigerant Leak Detector – SRL2(K7)
– Include chargers for the truck and the shop
– (5) O-rings and 10 Replacement Filters – RFL2
– 9-inch Flex-Probe Extension – RFE2
– Rigid Extension Probe – RRE2
– Blow-Molded Case – ABMK3
– Operator’s Manual -
Vacuum Gauges
Fieldpiece SVG3 Digital Micron Vacuum Gauge
Fieldpiece SVG3 Digital Micron Vacuum Gauge
Fieldpiece SVG3 Digital Micron Vacuum Gauge is a compact, rugged gauge that is loaded with features HVACR professionals need to help them do more. It includes a large, dual display with a rate indicator, alarms, timer, rugged rubberized case, and a hook at strap that allows the vacuum gauge to be hung at any angle.
Fieldpiece SVG3 contains features to make evacuations easier and faster. The display has a bright backlight for high visibility in any situation. To minimize leaks the SVG3 has a schrader depressor that can connect directly to your core removal tool, or directly to the service port. Fewer connections reduce the potential for leaks unrelated to the system. The rate indicator helps determine if there are any leaks within the system.
When the vacuum reaches the low alarm set point, an audible alarm triggers, the backlight flashes, and the integrated stopwatch restarts to show the technician how long the system has maintained a deep vacuum. You can set both high and low alarms. And the timer can display how long it took to get to the alarm and how long the vacuum has been maintained.
Rate Calculator
– View how fast system pressure is rising or falling
Schrader Depressor
– Minimizes leaks by reducing connections
1 Micron Resolution, 0 – 9999 Micron Range
Units of measure: microns (µm) of mercury, mmHg, mbar, mTorr, Torr, and pascals
Alarms and Stopwatch
– Be alerted when system drops to desired level, and know how long it took -
Electrical Testing
CO detectors and cracked heat exchangers
The model ACM3 carbon monoxide accessory head enables most digital multimeters to measure low levels of carbon monoxide in parts per million (PPM). It is intended to measure levels of CO in still ambient air. In many cases, it can help pinpoint sources of CO.
-
Electrical Testing
SC460 Wireless Clamp Meter
The SC460 is an essential clamp meter with wireless functionality for the HVACR professional.
Receive wireless measurements from Fieldpiece accessory heads and wireless transmitters from anywhere on the jobsite. For instance, receive an indoor delta T temperature measurement wirelessly from a Fieldpiece transmitter while you work at the condenser. Send your electrical measurements to the Job Link™ mobile app via the Fieldpiece JL2 Transmitter. -
Electrical Testing
SC660 Wireless Clamp Meter
The SC660 is the top of the line clamp meter with wireless functionality for the HVACR professional.
Receive wireless measurements from Fieldpiece accessory heads and wireless transmitters from anywhere on the jobsite. For instance, receive an indoor delta T temperature measurement wirelessly from a Fieldpiece transmitter while you work at the condenser. Send your electrical measurements to the Job Link™ mobile app via the Fieldpiece JL2 Transmitter. -
Electrical Testing
SNCV1 Non-contact Voltage Detector
This non-contact voltage detector features an analog feel. The closer the probe is to the voltage source,
the louder and brighter the indicators become. Detects AC voltages without contact and features a bright red LED light and buzzer. With a 24VAC to 440VAC range of the SNCV1 offers technicians the ability to test thermostats and other HVAC/R parameter easily. Clips to your shirt pocket and is a quick source to find out whether that line is hot or not.
